How to use DecoSticks Wall Stickers
It couldn’t be easier to apply DecoSticks wall stickers.
1. Clean
Wipe down with a dry cloth so the surface is smooth, dry and free of dust and dirt. DecoSticks can be applied to walls, wood, glass, concrete - basically any smooth, dry surface.
2. Plan
Remember you can remove DecoSticks once applied, but you will not be able to re-use them. Cut roughly around the individual graphics and arrange them on your surface using scotch or masking tape, until you are happy with your design.
3. Prep
Get your sheet of DecoSticks and lay them down on a flat hard surface of your choice, graphic side down. Press firmly over the entire sheet with the edge of a credit card. You are re-activating the bond between the DecoStick and the clear transfer tape.
4. Remove
With the graphic side still down, start from a corner and very carefully and slowly peel the white backing away from the clear tape. Always peel at a 45-degree angle. The graphic should stay attached to the clear front sheet. Discard the white backing.
5. Apply
Once the white backing has been removed be very careful not to allow DecoSticks to fold in on themselves, since they are super sticky! Place one edge of the graphic onto your surface, in its desired position. Pressing firmly, move your hand slowly across the graphic. With the edge of a credit card finish the application by rubbing over the entire graphic.
6. Peel
Once smoothed down, carefully & slowly remove the clear tape, peeling at a 45-degree angle. If some of the graphic begins to lift, stop pulling. Gently press it back onto your surface and then continue peeling.
7. Admire
Stand back and admire your work. If you’re especially proud of what you’ve done, take a picture and send it to us.
In order to make your DecoSticks experience a happy one, here’s some tips:
Please allow time for your painted walls to fully dry before using DecoSticks (2-3 weeks). If applied before the paint is fully dry, the adhesive from the graphic could bond more strongly to the paint, potentially causing some paint to come off when decals are removed.
Removing is as easy as applying. Just use your finger nail or a sharp pointed object to loosen one corner and then peel back at a 180 degree angle.
Usually DecoSticks just peel off with no problems and no damage to surfaces. However, the condition of some painted surfaces and the location of your DecoSticks can mean that some paint flecks are also removed. Depending on a combination of these factors, minor paint touch-ups could be required after removal. DecoSticks is not liable for possible damage to surfaces.






